Used AutoHex II BMW Full Package Diagnostics Scan Tool With HexTag Programmer AHX0005

Used AutoHex II BMW Full Package Diagnostics Scan Tool With HexTag Programmer AHX0005

Available:In Stock
$2,599.00 $5,850.00

Autohex II BMW Key Programming Tool overview:

Autohex II Diagnostic Scan Tool has been designed to be your own technical assistant, especially in BMW cars where things were stuck before Autohex II be on market.

Autohex 2 BMW Functions:

  • Autohex II Programming BMW Ecu individually
    • BMW Ecu Programming is easy to use with Autohex II, it performs Flashing the Ecu with the latest version, codes it, Change VIN, and other functions in one step.
  • Autohex II BMW ISN Reader and Writer Software
    • BMW ISN Editor Software in Autohex II lets you read ISN from DME, match it with CAS. This is essential for DME or CAS replacement, Autohex reads ISN from a wide range of DME/DDE
  • Autohex II Coding BMW ECU individually
    • Autohex 2 ECU coding for BMW is a straightforward function, you can choose between Auto and Manual coding to encode the Ecu you wish
  • Autohex II BMW Ecu Manual Coding
    • Autohex II BMW Software can do two methods of Ecu coding, auto coding which will be calculated from FA, and manual coding for Ecu modification
  • Autohex II BMW Vehicle Order Editor
    • Autohex 2 BMW Software can write FA into CAS from other Ecus, backup FA in other Ecus, also you can modify the vehicle order safely
  • Autohex II BMW EGS ISN Synchronization
    • Autohex II supports EGS EWS Reset for 6HP in E series and EGS EWS Reset for 8HP in F and G series, only a few steps are required
  • Autohex II CAS Firmware
    • For making keys, reading ISN, and changing VIN for CAS which comes with specified part numbers, will not work just through direct reading, CAS Firmware function should be done to make it work
  • Autohex II BMW Key Programming E Series And Mini
    • BMW Key programming by Autohex 2 is done by OBD, No dump is required. including CAS with the latest update and all keys lost. it supports all BMW Models as well as Mini Cooper.

Autohex software packages included:

  • Autohex BMW key programming
  • Autohex BMW ECU programming
  • Autohex BMW ISN Boot mode
  • Autohex BMW ISN Read / Write
  • Autohex BMW EGS EWS reset
  • Autohex BMW ECU coding

BMW Autohex 2 box contains:

  • 1 X Autohex 2 main device interface
  • 1 X Autohex HTag pro adapter
  • 2 X USB cables

Note: This is a used Autohex ii programming device, and it is working perfectly with no issue, for some function you may need to buy the update from the AutoHex company.

Autohex II BMW Key Programming Tool overview:

Autohex II Diagnostic Scan Tool has been designed to be your own technical assistant, especially in BMW cars where things were stuck before Autohex II be on market.

Autohex 2 BMW Functions:

  • Autohex II Programming BMW Ecu individually
    • BMW Ecu Programming is easy to use with Autohex II, it performs Flashing the Ecu with the latest version, codes it, Change VIN, and other functions in one step.
  • Autohex II BMW ISN Reader and Writer Software
    • BMW ISN Editor Software in Autohex II lets you read ISN from DME, match it with CAS. This is essential for DME or CAS replacement, Autohex reads ISN from a wide range of DME/DDE
  • Autohex II Coding BMW ECU individually
    • Autohex 2 ECU coding for BMW is a straightforward function, you can choose between Auto and Manual coding to encode the Ecu you wish
  • Autohex II BMW Ecu Manual Coding
    • Autohex II BMW Software can do two methods of Ecu coding, auto coding which will be calculated from FA, and manual coding for Ecu modification
  • Autohex II BMW Vehicle Order Editor
    • Autohex 2 BMW Software can write FA into CAS from other Ecus, backup FA in other Ecus, also you can modify the vehicle order safely
  • Autohex II BMW EGS ISN Synchronization
    • Autohex II supports EGS EWS Reset for 6HP in E series and EGS EWS Reset for 8HP in F and G series, only a few steps are required
  • Autohex II CAS Firmware
    • For making keys, reading ISN, and changing VIN for CAS which comes with specified part numbers, will not work just through direct reading, CAS Firmware function should be done to make it work
  • Autohex II BMW Key Programming E Series And Mini
    • BMW Key programming by Autohex 2 is done by OBD, No dump is required. including CAS with the latest update and all keys lost. it supports all BMW Models as well as Mini Cooper.

Autohex software packages included:

  • Autohex BMW key programming
  • Autohex BMW ECU programming
  • Autohex BMW ISN Boot mode
  • Autohex BMW ISN Read / Write
  • Autohex BMW EGS EWS reset
  • Autohex BMW ECU coding

BMW Autohex 2 box contains:

  • 1 X Autohex 2 main device interface
  • 1 X Autohex HTag pro adapter
  • 2 X USB cables

Note: This is a used Autohex ii programming device, and it is working perfectly with no issue, for some function you may need to buy the update from the AutoHex company.