X300 DP Plus Key Programmer Features:
This device is a new Android-based vehicle trouble diagnostic device developed for internet applications. It inherits from OBDSTAR advanced diagnosing technology and it is characterized by covering wide range of vehicles, featuring powerful function, and providing precise result. Through vehicle diagnostic OBD connector and variant mobile intelligent terminals, it achieves vehicle trouble diagnosis for full car model and full system vehicle.
Meanwhile, taking advantage of mobile internet, this device integrates more application and service, such as Maintenance Database, remote assistant, One Key Upgrade etc.
X300 DP Plus Advantages:
- Built-in VCI box
- 8-inch touchscreen
- Charge directly via OBD interface
- Practical and high-end gift box
- Industrial design with silicone case
- Back bracket design: prop on the steering wheel or stand on the table
- With 4 Toyota simulation keys (the fifth is coming soon)
- P001 programmer: EEPROM adapter + RFID adapter + Key Renew adapter
- Add the clip of reading SOP 8PIN EEPROM
- C001/C002 circuit board to read and write chip data with welding
- IMMO induction coil to detect the key induction coil failure of the vehicle.
- Add wiring harness of ECU reading by OBD (for ECU cloning and switch activation)
X300 DP Plus Software Advantages:
1. Key programming throw Eeprom & MCU applications
2. Renew used Key & smart keys
3. Key programming throw OBD II for spare and all keys lost
4. Remote programming
- Cluster Calibrate: wild vehicle coverage, pls check the car list
- Diagnosis: realize all vehicle systems diagnosis
- Special Functions TPS/ABS/EPB/DPF/TPMS/SRS Reset/Fuel Injector/Gear Learning/Battery Matching/ECU Programming/Throttle Matching/Oil/service reset/Steering Angle Reset/Remote Manual Setting/Electronic Steering Reset/CVT Learning/value Reset
- Vehicle ECU Programming Cloning and can be done by the following options
- Clone ECU means copy ECU, that is the OBDSTAR KEY MASTER DP Plus copies the data from the original car ECU, then write it into another same ECU hardware, so that it can achieve the same function as the original ECU.
- When you want to change the new ECU or the second ECU, if you use KEY MASTER DP Plus to clone via OBD, you won't need to go to the 4s store to do the online programming or dismantle ECU to weld, read & write.
- ECU clone Pros : No need to go to 4S shop, convenient, fast and save money.
- Simplify the operating steps, even the amateur can also operate.
- No need to dismantle and weld the ECU to read & write, it is zero risk to clone ECU via OBD with the KEY MASTER DP Plus.
- Switch Activation Function
- (Today many instruments or audio of vehicles activate secondary power supply to go into power-on status by relevant module CAN communication on the vehicle, but sometimes an instrument or an audio is separated from vehicle CANBUS network, causing startup failure when it needs to be repaired by an auto technician. This function can simulate CAN communication to activate secondary power supply, so the instrument or the audio enters into power-on status. In this way, it not only can test and verify the instrument or the audio, but also save an enormous cost for an auto technician to purchase a large number of startup platforms of various vehicles and wiring harnesses!)
- Add “Help” Functions
- 1. including built-in testable vehicle models, upgrade announcement, features, help notes and wiring diagrams, etc.
- 2. Carlist and upgrade announcement, all details are available on the device
- 3. Customers can look up the features or uniquely support functions on the device
- 4. Help notes: built-in help notes for each model or function
- 5. Wiring diagrams: built-in ECU wiring diagrams, more intuitionistic and convenient
Software Pack Details:
Immobilizer + Special function (EEPROM + Key Renewing) Adapter (P001 programmer + C001 circuit board + C002 circuit board + W001 cable + W002 data cable + W003 data cable + Toyota smart key Emulator) + others (Ignition coil + Remote tester)
- Operation system: Android 5.1.1
- CPU: Exynos 4418 Dual Core ARM Cortex A9 1.4GHz
- Battery: 3700mA, rechargeable polymer lithium battery
- Extension memory card: 32G Micro SD (TF) card supported
- Memory capacity:1GB
- Storage capacity: 32GB
- LCD: 8.0 inch
- LCD resolution: 1280*800
- Touch screen: Capacitive touch screen
- Camera: 5 mega rear view camera
- Wi-Fi: supported
- Working temperature: -10℃ ~ 55℃（14℉ ~ 131℉
- Storage temperature: -20℃ ~ 70℃（-4℉ ~ 158℉
- Weight: about 1.0 Kg
- Dimension: 254mm*174*mm*35mm
|Brand||Model||From Year||To Year|
|OBD STAR||ALL MODELS|