Advanced Scooter Workshop Key Programming Device With Software ASW

 
Price
$236.75
You found Better Price?

MBE Advanced Scooter Workshop Tool

 
Is a K-Line tool that enables to work with ignition control unit (CDI) through K-line Cables for PIAGGIO, APRILIA, GILERA, PEUGEOT, VESPA and DERBI motor scooters. it can incorporates ignition control unit (CDI) internal memory modification functions without cutting its plastic package, scrape sealant, soldering any wires or de-soldering memory IC. All you have to do is to connect four wires to controller connector.
 

How to Use Advanced Scooter Key Programmer:

MBE advance scooter workshop Doesn’t require drilling or cutting of ignition controller plastic enclosure, no scraping of green filling, no soldering is necessary - all memory reading functions works by K-Line.
USB / K-Line interface connects to the ignition controller only with 4 wires.
Key data for T5-11 transponder is calculated after EEPROM data reading procedure.
Advance Scooter Workshop Download Page show more details on how to use Advance Scooter Workshop Tool
 

MBE Advanced Scooter Immo Tool Main Features:

  • Copying of data from faulty CDI controller into another (even used one)
  • Reading T5-11 formatted Key Data from CDI controller if all keys are lost
  • Resetting of used CDI controller to the state of a brand-new controller (virginize)
 
Advanced Scooter Key Programming Tool EEPROM Read/Write functions will help you:
- To copy data from faulty CDI controller into another (even used one)
- To read T5-11 formatted Key Data from CDI controller if all keys are lost
- To reset used CDI controller to the state of a brand NEW controller
  All functions works by K-line. 
 

Supported ignition (CDI) / Injection controllers:

 
 - PHILIPS TSDI / DiTECH / PUREJET with TQFP-64 MC68HC908AZ60A (3K85K) MCU
READ/WRITE MC68HC908AZ60A internal EEPROM by K-Line
READ/WRITE external SPI EEPROM 25C160 by K-Line
READ MC68HC908AZ60A full 64K memory area
CLEAR FAULT MEMORY (NEW!)
RESET TO NEW / IMMO-OFF (NEW!)

 - MAGNETI MARELLI IAW 5AM HW103 / HW610 injection control module (HYBRID) with EEPROM 95160
READ / WRITE of external EEPROM 95160 by K-Line
RESET TO NEW (NEW!)

 - MAGNETI MARELLI with TQFP-64 MC68HC05Bxx (0D54J, 0D60J) MCU (system type ACI100, ACI50X, ACI60X)
READ / WRITE of MC68HC05B8/B16 internal EEPROM by K-Line
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder
CALCULATE CRC of key data blocks

 - EFI TECHNOLOGY with ST72C334 / ST72F521 MCU and 95040 / 95080 EEPROM (system type ACII, AC2I, AC5I, AC8I, AC19I, AC20I, AC21I, AC23I, AC25I AC32I etc.)
READ / WRITE of ST72C334 internal EEPROM by K-Line
READ / WRITE of external 95040 or 95080 SPI EEPROM by K-Line
READ data of TRANSPONDER KEY in the ignition lock by K-Line. Any of EFI TEECHNOLOGY CDI now can be used as a simple transponder reader for scooter keys
RESET of previously used CDI controller to the FACTORY state
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder
CALCULATE CRC of key data block

 - MAGNETI MARELLI IMM003/IMM006 immobilizer module with 28 pin MC68HC05E6 (0F82B, 0G72G, 2F75B) MCU
READ / WRITE of MC68HC05E6 (0F82B / 0G72G) internal EEPROM by K-Line
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder
RESET of previously used Immobilizer Control Unit to the FACTORY state

 - MAGNETI MARELLI MIU1 (32MIU1) injection control module / throttle body with ST10F269-T3 MCU
READ KeyData memory block from FLASH of ST10F269-T3 by K-Line
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder

 - MAGNETI MARELLI MIU2 (32MIU2) injection control module / throttle body with ST10F269-T3 MCU and EEPROM 95160
READ KeyData memory block from FLASH of ST10F269-T3 by K-Line
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder
 
 - MAGNETI MARELLI MIU4 (32MIU4) injection control module / throttle body with ST10F269-T3 MCU and EEPROM 95160
READ KeyData memory block from FLASH of ST10F269-T3 by K-Line
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder
 
 - MAGNETI MARELLI MIU G3 (32M3G1 / 38M3G1) injection control module / throttle body with Infineon SAK-XC2060 and EEPROM 95320
READ / WRITE of external EEPROM 95320 by K-Line
CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder
RESET of previously used Injection Control Unit to the FACTORY state
CALCULATE CRC
 
 - MAGNETI MARELLI IAW15 injection control module with MOTOROLA MC68HC11F1 (2E87J) MCU
READ / WRITE of internal MC68HC11F1 EEPROM by K-Line
CALCULATE MASTER key data for programming into the T5-TYPE11 transponder
RESET of previously used Injection Control Unit to the FACTORY state
CALCULATE CRC
 
NOTE: The MBE Advance Scooter Key Programmer tool does not have ability to program transponder with calculated key data by itself, any transponder programmer with T5 transponder programming capability is suitable to perform final key making steps.
 

| Advanced Scooter Workshop Software and Advanced Scooter Workshop Manuals and Advance Scooter Workshop Driver can be downloaded from the download section |

You can download the advanced scooter workshop connections diagram from this link
You can download the advanced scooter workshop key reader manual from this link  
You can download the manual how to reset AEC302C-AEC400 from this link

Specifications

Item Code ABK-4300
Manufacturer ABK

Models

Brand Model From Year To Year Note
APRILIA MOTORCYCLE CHECK SUPPORTED SYSTEMS
MOTORCYCLES ALL MODELS CHECK SUPPORTED SYSTEMS
PIAGGIO MOTORCYCLE CHECK SUPPORTED SYSTEMS
VESPA MOTORCYCLE CHECK SUPPORTED SYSTEMS

 

  • MBE Advanced Scooter Workshop Tool Motorcycle MAGNETI MARELLI ECU Reading & Key Programming

Similar Products

Related Products