An-San Carisma S Key Cutting Machine TR-3000

In the systems used in automatic key copying machines, durations of processing and reprocessing backward are generally equal. In the course of key processing, this puts too much pressure on the knife and it causes not only rusting on the knife but also its being on the blink. Thanks to the system we make use of the processing duration is shortened down to a minimum such as 35 seconds 25 seconds of this period of time is for processing and the rest of 10 seconds is for reprocessing it backward.

The most striking feature of the Carisma series is its horizontally working mill. While copying keys, with the loss in angle from the lower plug to the upper plug in the code of locking, circular working milling systems increase the error rate.

Thanks to the horizontal working system developed, no matter how many keys are processed from one copy to the other, because the cutting and follower centers of the raw key and the copied one are at the center, the error rate on the copied keys is always zero. Because of that, An-San gives 1OODfo of opening warranty to all keys it has made.

The microchip inserted in the machine, not only allows its all components to work but also keeps them under control and keeps a record of all procedures run on the machine. Thanks to that, maximum safety against any malfunction is obtained plus it informs various conditions which need service such as rusting of cutter kit, service time both visually and vocally.